CCW-705

Self-Adhered Air, Vapor and Water Resistive Barrier

CCW 705

CCW-705

Self-Adhered Air, Vapor and Water Resistive Barrier

CCW-705 is a self-adhered, water-resistive air barrier consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue cross-laminated HPDE film. It is specifically designed to be self-adhered to a prepared substrate providing an air, vapor and water resistive barrier in full wall applications or as penetration/flashing membrane with other air barrier systems.

Especificaciones:

4"

x100'

6"

x100'

9"

x100'

12"

x100'

18"

x100'

24"

x100'

36"

x100'

36"

x 75'

Schedule a Meeting

Product Details

CCW-705 is designed for use as a self-adhered air, vapor and water resistive barrier in above-grade walls. It can also be used as a transition sheet in conjunction with Henry® Air-Bloc® and Barritech™ fluid applied air barriers in details such as rough openings, angle changes, joints, transitions and terminations. CCW-705 can also be used as a self-adhered flashing for providing an air and watertight seal around openings, over joints, over transitions and at terminations in wall assemblies. The product is installed to fully supported, opaque wall substrates and covered with a code-approved exterior cladding or thermal barrier.

  • Factory-controlled composition and thicknes
  • Impermeable to air, moisture vapor and water
  • Compatible in Henry® Air-Bloc® 17MR, 16MR, 21FR, 21 and Barritech VP, NP, NP LT fluid applied air barrier assemblies

Codes & Approvals

  • International Energy Conservation Code “IECC” 2021 Section C402 Air barrier material <0.004 CFM/ft2 @ 1.57PSF (0.02 L/[s*m2]@ 75Pa) per ASTM E2178 and air barrier assembly <0.04 CFM/ft2 @ 1.57PSF (0.2 L/[s*m2]@ 75Pa) per ASTM E2357
  • International Building Code “IBC” 2021 Section 1403.2 Water resistive barrier: Self-adhered sheet, ICC-ES AC-38/ AAMA 711, non-permeable; must not be used where Grade D “permeable” product is required. Section 1404.4 Flashing per AAMA 711.
  • Air Barrier Association of America: Evaluated air barrier material and air barrier assembly
  • USGBC LEED v4: MR Credit Building Product Disclosure & Optimization; EPD 10573 product-specific environmental product declaration “EPD” with Cradle to Gate Scope

  • Simple peel and stick application

  • Provided in convenient sizes for covering the whole wall or for flashing details

  • Strong adhesion to many substrates prepared with Henry® adhesive/primer

  • Flexible at low temperatures

  • Self-gasketing when penetrated and under compression with self-tapping screws

Technical & Installation

  • CCW-705 & CCW-705 XLT | Guide Specification

    Descargar

    Icono de archivo

Sustainability

  • CCW-705 & CCW-705 XLT | LEED Certification

    Descargar

    Icono de archivo

  • Environmental Product Declaration (EPD) | Sheet and Hot-Melt Rubberized Asphalt Products

    Descargar

    Icono de archivo

  • CCW-705 | Health Product Declaration

    Descargar

    Icono de archivo

Programa una reunión con tu asesor Henry hoy mismo