Choose Country
United States
Canada - English
Henry Blueskin PreSeal FAQs
Understanding Pre-applied Waterproofing
The Henry Blueskin PreSeal membrane is a pre-applied, fully and permanently bonded sheet membrane system for waterproof construction. Learn more about Blueskin PreSeal 320 & Blueskin PreSeal 435 below.
Request a MeetingQ: What type of waterproofing applications can Blueskin PreSeal 320 and Blueskin PreSeal 435 Pre-applied waterproofing membrane be used in?
A: Blueskin PreSeal 320 and Blueskin PreSeal 435 can be used in pre-applied waterproofing applications such as underslab, blindside or property line applications.
Q: Does Blueskin PreSeal 320 and Blueskin PreSeal 435 require a protection slab?
A: No, they do not require a protection slab, yet Henry recommends the use of a protection slab on applications deep into the water table.
Q: Are Blueskin PreSeal 320 and Blueskin PreSeal 435 resistant to radon?
A: Yes, they are both resistant to radon.
Q: How do you attach BlueSkin PreSeal 320 and Blueskin PreSeal 435 to substrates?
A: These products can be attached using mechanical fasteners or Blueskin PreSeal Tape 50S.
Installation Support
Q: What type of tape is used for seams on the Blueskin PreSeal 320 and Blueskin 435 membranes?
A: Henry supports the use of the Blueskin PreSeal Tape 120V or Blueskin PreSeal Tape 50S
Looking to use Blueskin PreSeal in your next project?
Request a Meeting→Compare Blueskin PreSeal 320 & Blueskin PreSeal 435
Q: What is the difference between Blueskin PreSeal 320 and Blueskin PreSeal 435 and other pre-applied waterproofing membranes?
A: Blueskin PreSeal 320 and Blueskin PreSeal 435 combine the chemical resistance of polypropylene and mechanical bonding capability of a geotextile to combine into a unique waterproofing solution. Blueskin PreSeal membranes are lightweight, chemically resistant waterproofing membranes that bond to concrete mechanically through a geotextile and chemically through an adhesive.
Q: What is the difference between the Blueskin PreSeal 320 and Blueskin PreSeal 435?
A: Thickness. The Blueskin PreSeal 320 is a 32mil thick membrane material and Blueskin PreSeal 435 is a 43.5mil thick membrane. With the added thickness, the Blueskin PreSeal 435 material is slightly heavier, yet both products are lighter than most competing plastic waterproofing membranes.
Q: Blueskin PreSeal has both a mechanical and adhesive attachment to concrete, why is that important?
A: The mechanical attachment happens much faster, shortly after concrete pour and during the concrete curing process. This allows for accelerated construction sequencing. Additionally, mechanical bonds are not as susceptible to dirt/debris contamination. The adhesive bond is a result of a heat of hydration, time and pressure between the concrete and the adhesive in the geotextiles. Active Adhesive bonds prevent water migration should the membrane be breached. By offering both bonding technologies, Blueskin PreSeal takes the best attributes of each bonding technology to ensure optimum performance.
Q: Why is polypropylene (PP) better than high density polyethylene (HDPE)?
A: Both are widely accepted plastics with considerable worldwide experience. While both have strong chemical resistance, the polypropylene is less dense and can accomplish similar performance. Blueskin PreSeal is lighter weight than competing HDPE technologies. This allows for less jobsite fatigue transporting rolls across the site. Additionally, the less dense molecular formula of polypropylene makes the material easier to work with in colder climates.
