R2+ Matte
R2+ Matte
Coated-Glass-Faced Polyiso Insulation
R2+ MATTE is a rigid foam insulation board designed for use in commercial construction above-grade wall applications to provide continuous, high R-value insulation. The product is composed of a closed-cell polyisocyanurate foam core bonded on both sides to a coated glass facer.
Sizes Available:
16"
Width
24"
48"
8'
Length
Product Details
R2+ MATTE can be installed on the exterior or the interior side of the wall assembly. R2+MATTE is offered in different thicknesses, sizes and foam core densities. It is secured in place with fasteners, adhesive or a combination of the two. The installation technique
depends on the wall assembly. R2+ MATTE has been fire-tested to NFPA 285 and passes this tough test in many wall assemblies. CCW provides R2+ MATTE insulation, R2+ accessories, and Henry/CCW air/vapor barrier membranes for a complete wall weatherization system.
- Qualifies as an “air barrier material” - meets the air barrier code requirement if board joints are taped
- Tough coated-glass facer resists damage during construction
- Non-reflective facer – no glare during exposure
- Factory-controlled thickness and composition
-
Passes NFPA 285 in many wall assemblies, including WRB membrane and practical window details
-
High R-value per inch – enables thinner board to be used, while still meeting code requirements
-
Meets wall assembly continuous insulation (ci) requirements prescribed by International Building Code
-
Multiple thicknesses and sizes available to provide fi ne-tuned R-value and easy installation
Technical & Installation
-
R2+ Matte | Guide Specification
Download
-
R2+ Matte | Architectual Details Combined CAD
Download
-
AB-0A R2+ Insulation Fasteners Specification
Download
-
AB-0B.1 R2+ Matte NFPA 285 Table of Substitution
Download
-
AB-0B.2 R2+ Matte NFPA 285 Table of Substitution
Download
-
AB-0C.1 R2+ Sheathe NFPA 285 Table of Substitution
Download
-
AB-0C.2 R2+ Sheathe NFPA 285 Table of Substitution
Download
-
AB-0C R2+ Matte NFPA 285 Wall Assemblies
Download
-
AB-0E R2+ Polyiso NFPA 285 Wall Configurations
Download
-
AB-1A 4'x8' Polyiso Insulation Fastener Pattern For Permanent Attachment
Download
-
AB-1B4'x8' Polyiso Insulation Temporary Fastener Pattern
Download
-
AB-2A.1 Tape Application
Download
-
AB-2A.2 Lap Dimensions - CCW Foil-Grip 1402 Tape
Download
-
AB-2A.3 Tape Over Board Joint and Fasteners
Download
-
AB-2A.4 Tape Over Fasteners
Download
-
AB-2B Sheet Application
Download
-
AB-2C Liquid Application
Download
-
AB-3 Vertical Joint Expansion
Download
-
AB-5A Polyiso Insulation Punched Window - Sill
Download
-
AB-5B Polyiso Insulation Punched Window - Jamb
Download
-
AB-5C Polyiso Insulation Punched Window - Head
Download
-
AB-6A 4'x8' Polyiso Insulation Secured w/Screws in Brick Ties
Download
-
AB-6B Screw-In Brink Tie
Download
-
AB-6C Stucco Attachment
Download
-
AB-6D Siding Attachment
Download
-
AB-6E Cladding Attachment with Knight CI System
Download
-
AB-7A Thermally Broken Shelf Angle with Deflection Track
Download
-
AB-8 Pipe and Penetration Flashing
Download
-
AB-9 Termination at Existing
Download
-
AB-11 Polyiso Insulation at Parapet
Download
-
AB-15 Outside/Inside Corners
Download
-
AB-16 Polyiso Insulation Foundation Tie-In
Download
-
AB-17 Lap-Dimensions -CCW Foil-Grip 1402 Tape
Download
-
R2-0A R2+ Insulation Fasteners Specification
Download
-
R2-0B.1 R2+ Matte NFPA 285 Table of Substitution
Download
-
R2-0B.2 R2+ Matte NFPA 285 Table of Substitution
Download
-
R2-0C.1 R2+ Sheathe NFPA 285 Table of Substitution
Download
-
R2-0C.2 R2+ Sheathe NFPA 285 Table of Substitution
Download
-
R2-0C R2+ Matte NFPA 285 Wall Assemblies
Download
-
R2-0D.1 R2+ Silver NFPA 285 Table of Substitution
Download
-
R2-0D.2 R2+ Silver NFPA 285 Table of Substitution
Download
-
R2-0E 4'x8' Polyiso Insulation NFPA 285 Wall Configurations
Download
-
R2-1A 4'x8' Polyiso Insulation Fastener Pattern For Permanent Attachment
Download
-
R2-1B AB-1A 4'x8' Polyiso Insulation Fastener Temporary Pattern
Download
-
R2-2A Double Layer of Polyiso Insulation
Download
-
R2-2B 4'x8' Polyiso Insulation Adhesive Pattern
Download
-
R2-3 Vertical Expansion Joint
Download
-
R2-4 24"x8' Polyiso Insulation with Brick Ties
Download
-
R2-5A Polyiso Insulation Punched Window - Sill
Download
-
R2-5B Polyiso Insulation Punched Window - Jamb
Download
-
R2-5C Polyiso Insulation Punched Window - Head
Download
-
R2-6A. 4'x8' Polyiso Insulation w/Stucco Lath
Download
-
R2-6B 4'x8' Polyiso Insulation Secured with Furring Strips
Download
-
R2-6D Factory Cut Polyiso Insulation Between Rows of Brick Ties
Download
-
R2-6E 16"x8' Polyiso Insulation Masonary Cavity Wall
Download
-
R2-6F 24"x8' Polyiso Insulation Between Horizontal Z-Furring
Download
-
R2-6G 24"x8' Polyiso Insulation Between Vertical Z-Furring
Download
-
R2-6H 24"x8' Polyiso Insulation Between 1st Layer Horizontal Z-Furring, 2nd Layer Vertical
Download
-
R2-6J 4'x8' Polyiso Insulation Secured w/Screw in Brick Ties
Download
-
R2-7A Polyiso Insulation Shelf Angle
Download
-
R2-8 Pipe and Penetration Flashing
Download
-
R2-9 Termination at Existing
Download
-
R2-10 Polyiso Insulation Punched Window - Head
Download
-
R2-11 Polyiso Insulation at Parapet
Download
-
R2-12 Polyiso Insulation at Parapet
Download
-
R2-13 Vertical Expansion Joint
Download
-
R2-14 Outside/Inside Corners
Download
-
R2-15 Outside/Inside Corners
Download
-
R2-16 Polyiso Insulation Foundation Tie-In
Download