|
provide complete and thorough product information regarding description, physical properties, packaging, usage, application procedures, features, and warranties.
were prepared to meet the needs of the specification writer and provide a complete outline covering specific information about standards, product description, and application.
provide a clear and graphic description of our material applications for roofs, walls, and foundations.
provide the user with a better understanding of our diverse range of products. Technical bulletins feature product improvements and updates, application procedures, and usage.
790-11
Hot Applied Rubberized Asphalt - Garage Deck Waterproofing
790-11 is a hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. - Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 is packaged in standard 50 lb. boxes. 35 lb boxes and 55 gallon drums (approximately 500 lb) are available in some locations. | |
790-11
Hot Applied Rubberized Asphalt - Plaza Deck Waterproofing
790-11 is a hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. - Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 is packaged in standard 50 lb. boxes. 35 lb boxes and 55 gallon drums (approximately 500 lb) are available in some locations. | |
790-11
Hot Applied Rubberized Asphalt - Foundation Waterproofing
790-11 is a hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. - Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 is packaged in standard 50 lb. boxes. 35 lb boxes and 55 gallon drums (approximately 500 lb) are available in some locations. | |
790-11 EV
Environmentally Friendly Grade Hot Applied Rubberized Asphalt - Garage Deck Waterproofing
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility. - Environmentally friendly, contains at least 25% post consumer recycled content
- Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 EV is packaged in standard 50 lb recyclable cardboard boxes. | |
790-11 EV
Environmentally Friendly Grade Hot Applied Rubberized Asphalt - Plaza Deck Waterproofing
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility. - Environmentally friendly, contains at least 25% post consumer recycled content
- Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 EV is packaged in standard 50 lb recyclable cardboard boxes. | |
790-11 EV
Environmentally Friendly Grade Hot Applied Rubberized Asphalt - Foundation Waterproofing
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility. - Environmentally friendly, contains at least 25% post consumer recycled content
- Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 EV is packaged in standard 50 lb recyclable cardboard boxes. | |
790-11 HE
Hot Applied Rubberized Asphalt
A hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. Henry 790-11 HE is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. Complies with CAN/CGSB-37.50. - Seamless application provides monolithic waterproofing
- Bridges non-working cracks up to 1/16” in width
- Conforms to surface irregularities
- Full adhesion to deck restricts lateral water movement
- 100% solids provide immediate cure on cooling
- Specially formulated for decks with slope such as ramps or bridges.
790-11 HE is packaged in standard 50 lb. boxes. 55 gallon drums (approximately 500 lb) are available in some locations. | |
Elasto-Seal CM100
Elasto-Seal CM100 Fast Curing, Elastomeric Fluid Waterproofing/Roofing Membrane
Elasto-Seal CM100 is a fast curing, one component elastomeric, solvent free, mositure cure waterproofing compound designed to provide a cold alternative to hot applied rubberized membrane systems or replace conventional hot mop felt ply and/or pre-formed sheeting systems. It is applied in a high build two-ply system or single ply application, which cures through reaction with airborne mositure to provide a heavy-duty "seamless" rubber-like, impervious membrane. Features | |
- Solvent Free
- Can be applied to damp or green concrete
- Fast curing cold applied membrane
- Very low odors
- Seamless rubberized asphalt membrane
- Excellent adhesion to most construction surfaces such as concrete, stone, wood, cement and metal
- Save for use in confined spaces or "hard to get at" applications
Aqua-Bloc SB
Elastomeric Liquid Membrane
Aqua-Bloc SB is a one component elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evaporation to provide a heavy duty seamless rubber-like impervious membrane. Aqua-Bloc can be trowel or spray applied. Choose Aqua-Bloc SB for cold weather applications or to waterproof smaller areas where application by trowel is more practicle. | |
Aqua-Bloc 2P
2-Part Internal Setting Liquid Membrane & Insulation Adhesive
Aqua-Bloc 2P is a two-part, 100% solids, self leveling liquid membrane, design to repair, level, and waterproof rough and uneven concrete surfaces. Product cures to a smooth, rubber-like membrane, which can act as a stand-alone waterproofing membrane or as a leveling coat for Blueskin WP200 or Duratac self-adhering membrane products. | |
Aqua-Bloc WB
Elastomeric Asphalt Emulsion Waterproofing
Aqua-Bloc WB
Elastomeric Asphalt Emulsion Waterproofing
Description
Aqua-Bloc WB is an elastomeric, liquid applied, emulsified asphalt membrane designed for below grade waterproofing of foundation walls and other structures. Complies with and exceeds the requirements of CAN/CGSB 37.2.
Features
- Waterbased and VOC Compliant
- Seamless low modulas elastomeric membrane.
- Retains flexibility over a wide temperature range.
- Perfect for waterproofing ICF (Insulated Concrete Forms) foundation walls.
- Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal and polystyrene.
- Can be applied to damp or green concrete.
- Bridges cracks.
- Contains no solvent and is environmentally friendly.
- Can be applied in one coat or in multiple coats with reinforcing fabric.
Packaging
5 gallon and 55 gallon drum
Aqua-Bloc QS
Elastomeric Asphalt Emulsion Waterproofing
Aqua-Bloc QS is a "quick-setting" elastomeric, emulsified asphalt membrane designed for waterproofing foundations walls made of concrete, concrete block or ICF (insulated concrete forms). It is applied with suitable spray equipment and a setting agent to acheive an immediate set through upon application. Complies with an exceeds the requirements of CAN/CGSB 37.1M Choose Aqua-Bloc QS for projects requiring low VOC's, low odor applications. It is excellent for use on green concrete or to waterproof ICF's (insulated concrete forms) or on projects where a fast set through of membrane is required due to quick backfilling requirements. | |
Blueskin WP 200
Self-Adhesive Waterproofing Membrane
Blueskin WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed to be self-adhered to a prepared substrate providing a high-performance waterproofing barrier. - SBS membrane flexible at low temperatures
- Fully adhered systems prevents lateral water movement
- No flame required
- Factory controlled thickness
- Negligible odor during application
- Thickness - 60 mils (1.5 mm)
- RollLength 66.7ft
- Roll Width - 36”
- Gross Coverage - 200 ft2
- Net Coverage* - 186 ft2
*Based on 65 mm laps both side and end laps.
| |
Blueskin WP 100 Basic
Self-Adhesive Waterproofing Membrane
Blueskin WP 100 Basic is a self-adhering waterproofing membrane consisting of SBS rubberized asphalt compound, which is integrally laminated to a blue, orientated polyethylene film. The membrane is specifically designed to be self-adhered to a prepared concrete or masonry substrates providing a high-performance waterproofing barrier for below grade use. - 60 mil thick, SBS modified membrane
- Fully adhered systems prevents lateral water movement
- Factory controlled thickness
- No odor or VOC's
- Thickness - 60 mils (1.5 mm)
- Roll Width - 36”
- Roll Length - 66.7ft
- Gross Coverage - 200 ft2
- Net Coverage* - 186 ft2
*Based on 65 mm (2") laps both side and end laps.
| |
Thermoseal
Thermofusible Waterproofing Membrane
Thermoseal is used as a single ply waterproofing membrane for bridge decks, foundations, tunnels, wet rooms and plaza decks. - Asphaltic Pavement can be applied directly over Thermoseal without additional protection course.
- Polyester reinforced for high strength and flexibility at all temperatures.
- Excellent tear resistance.
- Torch grade membrane.
- Waterproofing membrane.
- Thickness - 5.0 mm (200 mils)
- Roll Length - 26.25’
- Roll Width - 38 3/8”
- Gross Coverage - 88.11 ft2
- Net Coverage - 78 ft2
| |
modifiedPlus NP180s/s Base Sheet is designed for use as a flashing sheet in a 790-11 Waterproofing and Roofing system. Refer to 790-11 Guide Specifications. - SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability.
- Non-woven polyester 180g/m²
- Designed for application in new construction, reroofing and retrofit roofing.
- Excellent tear resistance.
- Thickness:90 mils
- Roll Length: 49.2’
- Roll Width: 39 3/8”
- Gross Coverage: 161.4 ft²
- Net Coverage: 147.8 ft²
| |
Blueskin® Adhesive
Adhesive for Blueskin SA Membranes
Blueskin Adhesive is a quick drying, rubber based adhesive for self -adhesive membranes - Quick setting.
- Aggressive tack provides adhesion of membrane.
- Suitable for application at normal and low temperatures.
- Easily applied.
Blueskin Adhesive is available in 5 gallon pails. Blueskin Spray-Prep is available in convenient aerosol spray cans. | |
HE93018
Polymer Modified Adhesive
930-18 is a solvent based, synthetic rubber sealant adhesive designed to prepare concrete and other construction surfaces for application of thermofused SBS modified bitumen membranes and hot applied rubberized asphalt membranes. - Quick setting.
- Suitable for application at below freezing temperatures.
- Polymer base provides positive adhesion of membranes.
- Easily applied by brush, roller or light duty spray equipment.
- Coverage: 200-300 sq. ft./gallon depending on porosity and texture of surface
930-18 Primer is available in 4.5 gallon pails. | |
910-01
Penetrating Asphalt Primer
Henry 910-01 Asphalt Primer is a light bodied asphalt based material for priming surfaces prior to the application of hot mopped or cold applied asphalt coatings, roof cements, mastics and adhesives. - Solvent based, its highly penetrating qualities assure a firm bond
- Excellant material for use as a general priming coat over smooth surface roofs, concrete, gypsum, cinder block, brick and metal surfaces
- Coverage: 100-500 sq. ft./gallon depending on porosity of surface
910-01 Primer is available in 4.7 gallon pails. | |
Blueskin Spray Prep
Blueskin Spray Prep Spray Adhesive
Blueskin Spray Prep is a rubber based spray adhesive designed to enhance the adhesion of Blueskin membranes. Blueskin Spray Prep is packaged in 15oz. spray cans | |
HE925 - BES Sealant is a premium, environmentally friendly, moisture cure, medium modulus sealant for construction joints subject to dynamic joint movement. - One-part, low-odor, moisture cure
- Provides excellent weathering resistance, flexibility, very low VOC, through use of a silyl-terminated polyether polymer (STPe)
- Fully compatible with Henry/Bakor air barrier, flashing, roofing and waterproofing membrane components
- Termination sealant for self-adhered modified bitumen membranes such as Blueskin
- External joint sealant for Henry/Bakor air barrier, waterproofing and roofing systems
- Alternative to silicone and moisture cure urethanes in above construction applications
- Seal wall and window penetrations
- Construction joints up to 1" width, subject to dynamic joint movement of +/-25%
| |
AquatacTM Primer
Emulsion Primer for Self-Adhesive Membranes
Aquatac Primer
Emulsion Primer for Self-Adhesive Membranes
Description
Aquatac is a polymer emulsion based primer for self-adhesive membranes.
Features
- Quick drying.
- Environmentally friendly - Low VOC content.
- Highly tacky film provides positive adhesion to membrane.
- Non-flammable during application.
- Easily applied by spray.
- Water based, no solvent odors.
- Specially designed to provide a high level of tack on vertical surfaces.
Packaging
Aquatac Primer is aavailable in 5gal pails.
Neoflash Adhesive
Adhesive for Neoflash membrane
A quick setting, pressure sensitive, contact adhesive of thin brush consistency with good tack retention. Neoflash Adhesive is packaged in 5 gallon pails. | |
NP180 p/p
Reinforcing Sheet
modifiedPlus NP180p/p Base Sheet is designed for use as the base or first ply in a high performance two-ply modified bitumen roofing system, or as a ply in two-ply Protected Membrane roofing system. Also, used as a reinforcing sheet in 790-11 Hot Applied Rubberized Asphalt Systems. - SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability.
- Non-woven polyester 180g/m² reinforcement.
- Designed for application in new construction, reroofing and retrofit roofing.
- Excellent tear resistance.
- Thickness:120 mils
- Roll Length: 32.9’
- Roll Width: 39 3/8”
- Gross Coverage: 107.6 ft²
- Net Coverage: 98 ft²
| |
Neoflash
Uncured Neoprene Flashing Sheet
Neoflash Uncured Neoprene Flashing Sheet is used with 790-11 Hot Rubberized Asphalt Membrane at expansion joints and exposed flashing details. - Excellent elongation and flexibility
- Designed for use as exposed flashing
- Excellent compatibility with either 790-11 Hot Rubberized Asphalt Membrane or Neoflash Adhesive
Neoflash Uncured Neoprene Flashing Sheet is packaged in 100’ lengths and in widths of 12”, 18”, 24” and 36”. | |
G100s/s
Base/Protection Sheet
modifiedPlus® G100s/s Base Sheet is designed for use as the base or first ply in a high performance two-ply modified bitumen flashings, or as the protection/separator sheet in Henry® protected membrane systems with polystyrene insulation. - Designed for application in new construction, reroofing and retrofit roofing.
- SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability.
- Glass reinforcement provides stability.
- Bonds well to hot rubberized asphalt.
- Easy to handle rolls.
- Thickness:80 mils
- Roll Length: 49.2’
- Roll Width: 39 3/8”
- Gross Coverage: 161.4 ft2
- Net Coverage: 147.8 ft2
| |
Filter Fabric NO4
Filter Fabric
Filter Fabric is a non-woven geotextile made up of polypropylene fibers. These fibers are needled to form a stable and durable network such that the fibers retain their relative position. It is nonbiodegradable and resistant to most soil chemicals, acids and alkali with a pH range of 3 to 12. Roll sizes:12.5’ x 432’ or 15’ x 432’ | |
Filter Fabric NO3
Filter Fabric
Filter Fabric is a non-woven geotextile made up of polypropylene fibers. These fibers are needled to form a stable and durable network such that the fibers retain their relative position. It is nonbiodegradable and resistant to most soil chemicals, acids and alkali with a pH range of 3 to 12. Roll sizes:12.5’ x 432’ or 15’ x 432’ | |
DB 650
Prefabricated Drainage Composites
Designed primarily for horizontal applications requiring high flow capacity, high compressive strength and the strength and filtration properties of a woven geotextile. Henry DB products consist of multiple components designed to enhance the performance of Henry protected membrane roofing and waterproofing systems. Henry DB consists of a polystyrene or PVC core combined with a polypropylene fabric. Polymeric films attached to the Henry DB provide additional protection for softer waterproofing systems. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 500
Prefabricated Drainage Composites
Designed primarily for vertical installations requiring high compressive strength and where high flow capacity is needed. Use is suitable for selected horizontal applications. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 350
Prefabricated Drainage Composites
Designed for horizontal applications requiring high compressive strength, moderate flow capacity, and the strength and filtration properties of a woven geotextile. Henry DB products consist of multiple components designed to enhance the performance of Henry protected membrane roofing and waterproofing systems. Henry DB consists of a polystyrene or PVC core combined with a polypropylene fabric. Polymeric films attached to the Henry DB provide additional protection for softer waterproofing systems. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 200S
Prefabricated Drainage Composites
|
