|
provide complete and thorough product information regarding description, physical properties, packaging, usage, application procedures, features, and warranties.
were prepared to meet the needs of the specification writer and provide a complete outline covering specific information about standards, product description, and application.
provide a clear and graphic description of our material applications for roofs, walls, and foundations.
provide the user with a better understanding of our diverse range of products. Technical bulletins feature product improvements and updates, application procedures, and usage.
790-11
Hot Applied Rubberized Asphalt - Garage Deck Waterproofing
790-11 is a hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. - Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 is packaged in standard 50 lb. boxes. 35 lb boxes and 55 gallon drums (approximately 500 lb) are available in some locations. | |
790-11
Hot Applied Rubberized Asphalt - Plaza Deck Waterproofing
790-11 is a hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. - Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 is packaged in standard 50 lb. boxes. 35 lb boxes and 55 gallon drums (approximately 500 lb) are available in some locations. | |
790-11
Hot Applied Rubberized Asphalt - Foundation Waterproofing
790-11 is a hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. - Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 is packaged in standard 50 lb. boxes. 35 lb boxes and 55 gallon drums (approximately 500 lb) are available in some locations. | |
790-11 EV
Environmentally Friendly Grade Hot Applied Rubberized Asphalt - Garage Deck Waterproofing
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility. - Environmentally friendly, contains at least 25% post consumer recycled content
- Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 EV is packaged in standard 50 lb recyclable cardboard boxes. | |
790-11 EV
Environmentally Friendly Grade Hot Applied Rubberized Asphalt - Plaza Deck Waterproofing
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility. - Environmentally friendly, contains at least 25% post consumer recycled content
- Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 EV is packaged in standard 50 lb recyclable cardboard boxes. | |
790-11 EV
Environmentally Friendly Grade Hot Applied Rubberized Asphalt - Foundation Waterproofing
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% recycled content. It is modified with additives to promote adhesion and improve low temperature flexibility. - Environmentally friendly, contains at least 25% post consumer recycled content
- Seamless application provides monolithic waterproofing.
- Bridges non-working cracks up to 1/16" in width.
- Conforms to surface irregularities.
- Full adhesion to deck restricts lateral water movement.
- 100% solids provides immediate cure on cooling.
790-11 EV is packaged in standard 50 lb recyclable cardboard boxes. | |
790-11 HE
Hot Applied Rubberized Asphalt
A hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and waterproofing membrane. It is hot poured in a single or fabric reinforced application. Henry 790-11 HE is composed of a specially selected blend of refined asphalts, synthetic rubber and mineral stabilizers. It is modified with additives to promote adhesion and improve low temperature flexibility. Complies with CAN/CGSB-37.50. - Seamless application provides monolithic waterproofing
- Bridges non-working cracks up to 1/16” in width
- Conforms to surface irregularities
- Full adhesion to deck restricts lateral water movement
- 100% solids provide immediate cure on cooling
- Specially formulated for decks with slope such as ramps or bridges.
790-11 HE is packaged in standard 50 lb. boxes. 55 gallon drums (approximately 500 lb) are available in some locations. | |
Aqua-Bloc SB
Elastomeric Liquid Membrane
Aqua-Bloc SB is a one component elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evaporation to provide a heavy duty seamless rubber-like impervious membrane. Aqua-Bloc can be trowel or spray applied. Choose Aqua-Bloc SB for cold weather applications or to waterproof smaller areas where application by trowel is more practicle. | |
Aqua-Bloc 2P
2-Part Internal Setting Liquid Membrane & Insulation Adhesive
Aqua-Bloc 2P is a two-part, 100% solids, self leveling liquid membrane, design to repair, level, and waterproof rough and uneven concrete surfaces. Product cures to a smooth, rubber-like membrane, which can act as a stand-alone waterproofing membrane or as a leveling coat for Blueskin WP200 or Duratac self-adhering membrane products. | |
Aqua-Bloc WB
Elastomeric Asphalt Emulsion Waterproofing
Aqua-Bloc WB
Elastomeric Asphalt Emulsion Waterproofing
Description
Aqua-Bloc WB is an elastomeric, liquid applied, emulsified asphalt membrane designed for below grade waterproofing of foundation walls and other structures. Complies with and exceeds the requirements of CAN/CGSB 37.2.
Features
- Waterbased and VOC Compliant
- Seamless low modulas elastomeric membrane.
- Retains flexibility over a wide temperature range.
- Perfect for waterproofing ICF (Insulated Concrete Forms) foundation walls.
- Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal and polystyrene.
- Can be applied to damp or green concrete.
- Bridges cracks.
- Contains no solvent and is environmentally friendly.
- Can be applied in one coat or in multiple coats with reinforcing fabric.
Packaging
5 gallon and 55 gallon drum
Aqua-Bloc QS
Elastomeric Asphalt Emulsion Waterproofing
Aqua-Bloc QS is a "quick-setting" elastomeric, emulsified asphalt membrane designed for waterproofing foundations walls made of concrete, concrete block or ICF (insulated concrete forms). It is applied with suitable spray equipment and a setting agent to acheive an immediate set through upon application. Complies with an exceeds the requirements of CAN/CGSB 37.1M Choose Aqua-Bloc QS for projects requiring low VOC's, low odor applications. It is excellent for use on green concrete or to waterproof ICF's (insulated concrete forms) or on projects where a fast set through of membrane is required due to quick backfilling requirements. | |
Blueskin WP 200
Self-Adhesive Waterproofing Membrane
Blueskin WP 200 is a self-adhering composite membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed to be self-adhered to a prepared substrate providing a high-performance waterproofing barrier. - SBS membrane flexible at low temperatures
- Fully adhered systems prevents lateral water movement
- No flame required
- Factory controlled thickness
- Negligible odor during application
- Thickness - 60 mils (1.5 mm)
- Roll Length - 66.7 ft.
- Roll Width - 36”
- Gross Coverage - 200 ft2
- Net Coverage* - 186 ft2
*Based on 65 mm laps both sides and end laps.
| |
Thermoseal
Thermofusible Waterproofing Membrane
Thermoseal is used as a single ply waterproofing membrane for bridge decks, foundations, tunnels, wet rooms and plaza decks. - Asphaltic Pavement can be applied directly over Thermoseal without additional protection course.
- Polyester reinforced for high strength and flexibility at all temperatures.
- Excellent tear resistance.
- Torch grade membrane.
- Waterproofing membrane.
- Thickness - 5.0 mm (200 mils)
- Roll Length - 26.25’
- Roll Width - 38 3/8”
- Gross Coverage - 88.11 ft2
- Net Coverage - 78 ft2
| |
modifiedPlus NP180s/s Base Sheet is designed for use as a flashing sheet in a 790-11 Waterproofing and Roofing system. Refer to 790-11 Guide Specifications. - SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability.
- Non-woven polyester 180g/m²
- Designed for application in new construction, reroofing and retrofit roofing.
- Excellent tear resistance.
- Thickness:90 mils
- Roll Length: 49.2’
- Roll Width: 39 3/8”
- Gross Coverage: 161.4 ft²
- Net Coverage: 147.8 ft²
| |
Blueskin® Adhesive
Adhesive for Blueskin SA Membranes
Blueskin Adhesive is a quick drying, rubber based adhesive for self -adhesive membranes - Quick setting.
- Aggressive tack provides adhesion of membrane.
- Suitable for application at normal and low temperatures.
- Easily applied.
Blueskin Adhesive is available in 5 gallon pails. Blueskin Spray-Prep is available in convenient aerosol spray cans. | |
HE93018
Polymer Modified Adhesive
930-18 is a solvent based, synthetic rubber sealant adhesive designed to prepare concrete and other construction surfaces for application of thermofused SBS modified bitumen membranes and hot applied rubberized asphalt membranes. - Quick setting.
- Suitable for application at below freezing temperatures.
- Polymer base provides positive adhesion of membranes.
- Easily applied by brush, roller or light duty spray equipment.
- Coverage: 200-300 sq. ft./gallon depending on porosity and texture of surface
930-18 Primer is available in 4.5 gallon pails. | |
910-01
Penetrating Asphalt Primer
Henry 910-01 Asphalt Primer is a light bodied asphalt based material for priming surfaces prior to the application of hot mopped or cold applied asphalt coatings, roof cements, mastics and adhesives. - Solvent based, its highly penetrating qualities assure a firm bond
- Excellant material for use as a general priming coat over smooth surface roofs, concrete, gypsum, cinder block, brick and metal surfaces
- Coverage: 100-500 sq. ft./gallon depending on porosity of surface
910-01 Primer is available in 4.7 gallon pails. | |
Blueskin Spray Prep
Blueskin Spray Prep Spray Adhesive
Blueskin Spray Prep is a rubber based spray adhesive designed to enhance the adhesion of Blueskin membranes. Blueskin Spray Prep is packaged in 15oz. spray cans | |
HE925 - BES Sealant is a premium, environmentally friendly, moisture cure, medium modulus sealant for construction joints subject to dynamic joint movement. - One-part, low-odor, moisture cure
- Provides excellent weathering resistance, flexibility, very low VOC, through use of a silyl-terminated polyether polymer (STPe)
- Fully compatible with Henry/Bakor air barrier, flashing, roofing and waterproofing membrane components
- Termination sealant for self-adhered modified bitumen membranes such as Blueskin
- External joint sealant for Henry/Bakor air barrier, waterproofing and roofing systems
- Alternative to silicone and moisture cure urethanes in above construction applications
- Seal wall and window penetrations
- Construction joints up to 1" width, subject to dynamic joint movement of +/-25%
| |
AquatacTM Primer
Emulsion Primer for Self-Adhesive Membranes
Aquatac is a polymer emulsion based primer for self-adhesive membranes.
- Quick drying.
- Environmentally friendly - Low VOC content.
- Highly tacky film provides positive adhesion to membrane.
- Non-flammable during application.
- Easily applied by spray.
- Water based, no solvent odors.
- Specially designed to provide a high level of tack on vertical surfaces.
Aquatac Primer is aavailable in 5gal pails.
Neoflash Adhesive
Adhesive for Neoflash membrane
A quick setting, pressure sensitive, contact adhesive of thin brush consistency with good tack retention. Neoflash Adhesive is packaged in 5 gallon pails. | |
NP180 p/p
Reinforcing Sheet
modifiedPlus NP180p/p Base Sheet is designed for use as the base or first ply in a high performance two-ply modified bitumen roofing system, or as a ply in two-ply Protected Membrane roofing system. Also, used as a reinforcing sheet in 790-11 Hot Applied Rubberized Asphalt Systems. - SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability.
- Non-woven polyester 180g/m² reinforcement.
- Designed for application in new construction, reroofing and retrofit roofing.
- Excellent tear resistance.
- Thickness:120 mils
- Roll Length: 32.9’
- Roll Width: 39 3/8”
- Gross Coverage: 107.6 ft²
- Net Coverage: 98 ft²
| |
Neoflash
Uncured Neoprene Flashing Sheet
Neoflash Uncured Neoprene Flashing Sheet is used with 790-11 Hot Rubberized Asphalt Membrane at expansion joints and exposed flashing details. - Excellent elongation and flexibility
- Designed for use as exposed flashing
- Excellent compatibility with either 790-11 Hot Rubberized Asphalt Membrane or Neoflash Adhesive
Neoflash Uncured Neoprene Flashing Sheet is packaged in 100’ lengths and in widths of 12”, 18”, 24” and 36”. | |
G100s/s
Base/Protection Sheet
modifiedPlus® G100s/s Base Sheet is designed for use as the base or first ply in a high performance two-ply modified bitumen flashings, or as the protection/separator sheet in Henry® protected membrane systems with polystyrene insulation. - Designed for application in new construction, reroofing and retrofit roofing.
- SBS polymer provides flow resistance at high temperatures and flexibility at low temperatures for lasting durability.
- Glass reinforcement provides stability.
- Bonds well to hot rubberized asphalt.
- Easy to handle rolls.
- Thickness:80 mils
- Roll Length: 49.2’
- Roll Width: 39 3/8”
- Gross Coverage: 161.4 ft2
- Net Coverage: 147.8 ft2
| |
Filter Fabric NO4
Filter Fabric
Filter Fabric is a non-woven geotextile made up of polypropylene fibers. These fibers are needled to form a stable and durable network such that the fibers retain their relative position. It is nonbiodegradable and resistant to most soil chemicals, acids and alkali with a pH range of 3 to 12. Roll sizes:12.5’ x 432’ or 15’ x 432’ | |
Filter Fabric NO3
Filter Fabric
Filter Fabric is a non-woven geotextile made up of polypropylene fibers. These fibers are needled to form a stable and durable network such that the fibers retain their relative position. It is nonbiodegradable and resistant to most soil chemicals, acids and alkali with a pH range of 3 to 12. Roll sizes:12.5’ x 432’ or 15’ x 432’ | |
DB 650
Prefabricated Drainage Composites
Designed primarily for horizontal applications requiring high flow capacity, high compressive strength and the strength and filtration properties of a woven geotextile. Henry DB products consist of multiple components designed to enhance the performance of Henry protected membrane roofing and waterproofing systems. Henry DB consists of a polystyrene or PVC core combined with a polypropylene fabric. Polymeric films attached to the Henry DB provide additional protection for softer waterproofing systems. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 500
Prefabricated Drainage Composites
Designed primarily for vertical installations requiring high compressive strength and where high flow capacity is needed. Use is suitable for selected horizontal applications. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 350
Prefabricated Drainage Composites
Designed for horizontal applications requiring high compressive strength, moderate flow capacity, and the strength and filtration properties of a woven geotextile. Henry DB products consist of multiple components designed to enhance the performance of Henry protected membrane roofing and waterproofing systems. Henry DB consists of a polystyrene or PVC core combined with a polypropylene fabric. Polymeric films attached to the Henry DB provide additional protection for softer waterproofing systems. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 200S
Prefabricated Drainage Composites
Designed for vertical and horizontal installations requiring a high compressive strength and moderate flow capacity. Henry DB products consist of multiple components designed to enhance the performance of Henry protected membrane roofing and waterproofing systems. Henry DB consists of a polystyrene or PVC core combined with a polypropylene fabric. Polymeric films attached to the Henry DB provide additional protection for softer waterproofing systems. - Integral part of a high performance Henry protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
DB 200
Prefabricated Drainage Composites
Designed for vertical and horizontal installations at shallower depths where moderate compressive strength is adequate. Henry DB products consist of multiple components designed to enhance the performance of Henry protected membrane roofing and waterproofing systems. Henry DB consists of a polystyrene or PVC core combined with a polypropylene fabric. Polymeric films attached to the Henry DB provide additional protection for softer waterproofing systems. - Integral part of a high performance Henry® protected membrane roofing or waterproofing system;
- Low installed cost compared to other drainage systems such as aggregates;
- Easy to handle and install
- Strong and durable with very high compressive strength and tear resistance;
- Chemically resistant
- High flow capacity
| |
Polyester Fabric
Reinforcement Sheet
Polyester Fabric is an unsaturated spun bonded polyester mat. - Will not absorb moisture or rot.
- Resists damage from soil acids and alkalis.
- Porosity allows good interply bond between layers of membrane.
- Exhibits good strength and tear resistance.
Polyester Fabric is packaged in rolls 600 ft. in length by 36" and 12" in width. Weight per roll is 12.5 lbs. for 36" wide rolls and 4.2 lbs. for 12" wide rolls. | |
Polybitume 570-05
Rubber Asphalt Sealer
Polybitume 570-05 Polymer Modified Sealing Compound is a top quality, high solids, rubber asphalt caulking and sealing compound formulated to provide extra flexibility and good bond. - Exceeds the performance standards of conventional asphalt caulking compounds.
- Gun or trowel consistency.
- Remains flexible on aging.
Polybitume 570-0 |
|
